Categories
Contact Us

Hongyuan Special Metallic Mateial Co.,Ltd

Add:Baoti Road, Baoji City, Shaanxi Province, China

E-mail:bjhy0917@hongyuanti.com

Tel:0917-2663399

Fax:0917-3809198

Service Hotline
+86-917-2663399

News

Home > NewsContent

Gr5

Gr5

The composition of TC4 titanium alloy is Ti-6Al-4V, which belongs to (α + β) -type titanium alloy and has good mechanical properties. Than the intensity. TC4 strength sb = 1.012GPa, density g = 4.4 * 103, specific strength sb / g = 23.5, and the specific strength of alloy steel sb / g less than 18. Titanium alloy low thermal conductivity. The thermal conductivity of titanium alloy is 1/5 of iron, 1/10 of aluminum, TC4 thermal conductivity l = 7.955W / m · K.

The composition of titanium alloy TC4 is Ti-6Al-4V, belonging to (a + b) type titanium alloy, and has good comprehensive mechanical and mechanical properties. Than the intensity. TC4 strength sb = 1.012GPa, density g = 4.4 * 103, specific strength sb / g = 23.5, and the specific strength of alloy steel sb / g less than 18. Titanium alloy low thermal conductivity. The thermal conductivity of titanium alloy is 1/5 of iron, 1/10 of aluminum, TC4 thermal conductivity l = 7.955W / m · K. Linear expansion coefficient = 7.89 * 10-6 ℃, specific heat = 0.612cal / g · ℃. Titanium alloy lower modulus of elasticity. TC4 elastic modulus E = 110GPa, about 1/2 of the steel, so prone to deformation of titanium alloy processing. TC4 (Ti-6Al-4V) and TA7 (Ti-5Al-2.5Sn) titanium alloys, two kinds of implantation schemes were used to modify the surface. The results show that the microhardness of titanium alloy increases remarkably after ion implantation The coefficient of sliding friction effectively improves the wear resistance.In order to explore its modification mechanism, the XPS analysis of the implanted and uninjected samples is carried out, and the satisfactory results are obtained.